Glovezilla
At Beeswift, we spend time developing and structuring amazing products, including our
new Glovezilla range.
Each glove comes with a retail ready header card. This strong robust card also adopts the same colour size chart
as the outer box and is 100% recyclable.
Each card also comes with its own barcode making it easy for the retailer
to add to their existing system. By adding a colour size chart it is easy to determine which size of Glovezilla glove
you are purchasing.
Easy to read titles on the front of the card, along with technical details for each glove, make
choosing the right product for the job simple.
Translation of the titles and technical information on the rear of
the card make this product perfect for the European markets.
As a company, we are continuing our efforts to ethically source products and reduce waste, whilst producing
products that are fit for purpose and ready to retail. Our outer boxes are all recyclable and we have reduced
our ink coverage.
HPPE 49%, Polyester 25%, Glass Fibre 12%, Steel 8%, Spandex 6% Liner.
100% Nitrile Rubber Coating
100% PVC TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
100% Sandy Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Orange Liner.
100% Sandy Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
100% Foam Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge Orange Liner.
45% UHMW PE + 30% nitrile + 25% rubber
100% Foam Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
)
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
)
HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
100% Nitrile Rubber Coating.
100% PVC TPR back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
Para-Aramid 71.2%, Steel 13.5%, Polyester 10.5%, Spandex 8% Liner.
100% Nitrile rubber coating.
Ventilated back.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 1 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
Nitrile Foam coating
15 Gauge - Nylon and Polyester
Comfortable and breathable for prolonged periods when performing precision tasks
EN 388: 2016
Level 4 - Abrasion
Level X - Cut resistance
Level 3 - Tear resistance
Level 1 - Puncture
Level A - ISO 13997 Cut Resistance
Double coated nitrile offers water and oil resistance
Wet/dry grip
Washable and can be tumble dried (Follow instructions)
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 2 - Tear Resistance
Level 1 - Puncture
Level B - ISO 13997 Cut Resistance
EN 511: 2006
Level X - Convective Cold
Level 2 - Contact Cold
Level X - Water Penetration
Double coated nitrile
13-gauge HPPE/Glass Fiber/Spandex liner
Wet/dry grip
Offers fantastic oil and water resistance
Washable and can be tumble dried (follow instructions)
EN 388: 2016
Level 4 - Abrasion
Level X - Cut resistance
Level 4 - Tear resistance
Level 3 - Puncture
Level D - ISO 13997 Cut Resistance